SenseCAP Solar Node P1 — Mesh Messaging, GPS & Batteries Not Included
SenseCAP Solar Node P1 — Mesh Messaging, GPS & Batteries Not Included is a Tracker / Mesh Device. Connectivity includes LoRa, Bluetooth, USB. Suitable for Positioning and connected-device deployment in Outdoor deployments.
Product Overview
Features
- Integrated with a 5W solar panel, and supports external batteries (which need to be provided by users themselves).
- The device comes pre-installed with Meshtastic firmware at the factory. It can be seamlessly integrated into the Meshtastic ecosystem.
- Compatible with the Grove Ecosystem (The list of supported sensors is provided below.), and supports plug-and-play of sensors such as temperature and humidity sensors, light sensors, etc.
- It is suitable for long-term outdoor use.
- Supports 8 to 9KM Transmission in open areas. It can be used as an outdoor node or repeater, easily expanding the Mesh network and enhancing network coverage.
- Accessory Options：If you need an antenna with higher gain, we recommend these antennas:
860-930MHz-3dBi-360mm900-930MHz-7dBi-920mm902-930MHz-8dBi-1300mmLinkLinkLink- Plug-and-play: Comes with a standard RF cable, which can be directly inserted into the pre-drilled hole (standard D-shaped hole) on the Solar Node bracket
- Three-step installation: Align → Insert → Lock
Specifications
|
Main controller |
XIAO nRF52840 Plus(Nordic nRF52840, ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash) |
|
LoRa Module |
Wio-SX1262 Module(Semtch SX1262, TXOP=22dBm@862-930MHz) |
|
GPS Module |
Users self-purchase and addXIAO L76K(Support GPS/GLONASS/Galileo) |
|
Antenna |
LoRa: Type: Rod-shaped rubber antenna Frequency range: 868-915MHZ Gain: 2dbi |
|
GNSS: GPS L1 C/A: 1575.42MHz GLONASS L1: 1602MHz BeiDou B1: 1561.098MHz |
|
|
Bluetooth 5.0 |
|
|
Solar Panel |
5W |
|
Interface |
Grove *1: IIC/GPIO |
|
USB-C debugging |
|
|
Button |
Power on/off |
|
Reset |
|
|
User-defined |
|
|
LED |
Charging status indicator lights *2 |
|
Solar panel status indicator light *1 |
|
|
Mesh heartbeat light *1 |
|
|
User-defined *1 |
|
|
Power supply |
5V |
|
Battery |
Users self-purchase and add |
|
Dimension |
191.2 x 201.2 x 42.1 mm |
Hardware Overview
- Diagram
- Overall effect diagram
- Accessories diagram
①
2dbi, 868~915MHz rubber rod antenna
②
Universal joint bracket, angle adjustable.
③
Bracket connector, can support the antenna
④
RF Cable; RP-SMA Male to RF-SMA Female; 300mm
⑤
Hoop bracket
Diameter:
70-100mm
⑥
Hoop ring
- Interactive items
⑦
Power switch
⑧
Reset
⑨
User-defined
⑩
Red light on: Charging
⑪
Green light on: Charged
⑫
Yellow light on: Device is exposed to light.
⑬
Blue light: Mesh heartbeat
⑭
White light: User-defined
⑮
Type-C: 5V 1A
- Dimension diagram
Applications
- Outdoor Adventure: Send real-time location and text messages in areas without network coverage.
- Mesh Network Expansion: Serve as a Mesh relay node to expand the coverage of the existing Meshtastic network. Support multi-hop transmission, where data can be relayed through multiple nodes, enhancing network reliability.
- Educational Experiments: Learn about the development of Meshtastic and LoRa decentralized networks.
- Environmental Monitoring: Provide a Grove interface to connect sensors for remote monitoring of the environment (such as temperature, humidity, air quality, etc.).
Part List
|
SenseCAP Solar Node P1 (without GPS & battery) |
x1 |
|
Mounting Brackets ● Universal Joint ● Connector ● Hoop Bracket ● Hoop Ring |
x1 |
|
2dBi 868 – 915MHz Rubber Rod Antenna |
x1 |
|
RF Cable: RP-SMA Male to RF-SMA Female-300mm |
x1 |
|
1/4-20 UNC Hex Head Machine Screw, 6 mm Long(Screw Pack) |
x2 |
|
Screw, Phillips Pan Head Machine, M6 × 14 mm, P1.0(Screw Pack) |
x4 |
|
Black Type-C Cable |
x1 |
|
User Manual |
x1 |
* Regional Availability
This product is not available for sale, shipment, or resale in Mainland China due to regional restrictions.
Policies & Guidelines
Warranty, shipping, and purchasing information
- All prices are stated in US dollars (USD), unless otherwise indicated.
- Full payment must be received and confirmed before an order is prepared or dispatched.
- Payment may be made by bank transfer, Bitcoin, or USDT. The payment methods available for each order are displayed at checkout.
- Shipping charges are shown separately at checkout. The quoted shipping charge includes applicable import duties, taxes, and customs-clearance charges for the delivery destination.
- An electronic invoice is made available in the Customer’s account after payment confirmation. An official sales invoice also accompanies the shipment.
- Orders may be cancelled for a full refund before order preparation begins. Once preparation has begun, cancellation is subject to the order’s processing status.
- A Customer wishing to return a non-defective product must request the return within 30 days of delivery. The product must be returned in good condition with its official sales invoice.
- For a non-defective return, the Customer is responsible for return shipping. The refund covers the product price only; the original shipping charge is not refundable.
- Refunds for returned products are initiated after the returned goods have been received and their condition verified. Approved refunds are initiated within seven business days and returned through the original payment method.
- The refundable amount is based on the USD value paid for the product. Refunds for Bitcoin or USDT payments are calculated against that USD amount, rather than a fixed quantity of cryptocurrency. The time required for funds to reach the Customer depends on the payment method and processing provider.
- All devices, sensors, and accessories purchased directly from SenseCAP are covered by a one-year warranty from the date of delivery.
- Warranty eligibility is verified against the original sales record and, where available, the product serial number. For products without a serial number, the order details and official sales invoice are used to identify the purchase.
- The warranty covers manufacturing defects and internal hardware failures arising under normal use and within the product’s specified operating conditions.
- Products that arrive damaged or non-operational should be reported to SenseCAP so that the appropriate shipping or warranty procedure can be arranged.
- Warranty claims are assessed through technical review. Depending on the findings, the resolution may include remote assistance, replacement parts, repair, or an equivalent replacement.
- Customers must obtain return authorization and shipping instructions before sending a product for warranty service.
- For an authorized warranty return, the Customer pays the cost of shipping the product to the designated service location. SenseCAP pays standard shipping for the repaired or replacement product back to the Customer.
- Warranty service addresses the supplied hardware. Network availability, connectivity, subscription services, and any network-based rewards depend on their respective operating requirements and are not guaranteed by the hardware warranty.
- Orders are shipped on a Delivered Duty Paid (DDP) basis to all available delivery destinations.
- The shipping charge displayed at checkout includes transportation, applicable import duties, taxes, and customs clearance. These import charges are not payable separately by the recipient.
- Products with a stated dispatch date are scheduled according to the date shown on the product page. Where no dispatch date is stated, the product is ready for dispatch and is handed over to the carrier within two business days after payment confirmation.
- Dispatch dates refer to handover to the carrier, not delivery to the Customer. Transit time depends on the destination and carrier service.
- Each shipment is accompanied by an official sales invoice and declared using an accurate product description, invoice value, and applicable customs classification.
- Tracking information is provided after the shipment has been handed over to the carrier.
- Customers are responsible for providing an accurate delivery address and any recipient information required to complete delivery and customs formalities.
- Shipping damage should be reported promptly. Customers should retain the product, original packaging, shipping labels, and invoice while the claim is assessed.
- If a shipment is lost or damaged, SenseCAP will review the case with the carrier and advise the Customer of the applicable resolution. Where the issue results from a packing or documentation error attributable to SenseCAP, the resolution may include repair, replacement, or refund.
Policy & Support Pages
Open the complete service, delivery, and support pages