SenseCAP Off-Grid Mesh Starter Kit
SenseCAP Off-Grid Mesh Starter Kit is a Bundle / Kit. Connectivity includes LoRa, Bluetooth, GNSS / GPS. Suitable for Two-Person Off-Grid Mesh Starter Kit in Indoor & Outdoor deployments.
Product Overview
Features
What is Meshtastic?
Meshtastic® is an open-source communication system built on LoRa technology that enables decentralized mesh networks.Meshtastic devices (also called nodes) communicate directly with each other and can relay messages across the network to extend communication range. This allows users to stay connected even without cellular coverage or internet access, and without paying any monthly subscription fees.
How to Choose the Right Meshtastic Device
Core Selection: Choose Your Portable Nodes (Clients)
In most application scenarios, the Meshtastic LoRa node will be attached to moving people, objects or animals.
|
Requirements |
Recommended Device |
Specification |
Application Scenario |
|
Portable |
● Card–sized ● IP65 ● 2–day Battery Life ● Easy to Clip onto Bag or Slide into Pocket |
● Hiking ● Skiing ● Urban Cycling ● Outdoor Exploration |
|
|
Direct Interaction |
Wio Tracker L1 Pro |
● OLED Screen ● 5-day Battery Life ● Direct Messages Transmission on Device |
● Hiking ● Camping ● Real-time Monitor ● Geek |
Pro Application: Expanding Your Network (Repeater)
If you need a repeater to expand your Meshtastic network, SenseCAP Solar Node would be a must-have product. Since these stay in fixed, unmanaged spots for a long time, low power consumption and easy setup are important.
|
Requirements |
Recommended Device |
Specification |
Application Scenario |
|
Wide-Area Signal Coverage |
● Solar Power ● Easy Installation ● Large Signal Transmission Range |
● Camping ● Data Forwarding |
All ‘s Meshtastic hardware comes with pre-flashed Meshtastic firmware. So you just need to turn on the device, configure LoRa via the app, and then you’re Meshing.
Here we provide some “Copy-Paste” solutions for your reference
The Dual Explorer |
T1000-E*2+Protective casing*2 |
● 5-8 kilometers communicable ● Position displayed on the offline map of the app |
|
L1 Pro*2+Protective casing |
||
|
T1000-E*1+L1 Pro*1 |
||
|
The Pro Rescuer |
L1 Pro × N + T1000-E × N |
Real-time monitor Cell phone free |
|
Wide-Area Signal Repeater |
Solar Node P1-Pro × 1 + (optional) 5.8dBi antenna |
● 24/7 ● Signal expansion |
By linking these devices together, you can easily build a network that spans tens or even hundreds of kilometers.
Optional Accessories
To make your experience even better, we’ve included several handy tools in the kit for you to choose:
- Wearables: Use the included snap hook, nylon lanyard or protective case to easily attach the T1000-E to your backpack, belt, or even your pet’s collar.
- Power & Charging: We also offer dedicated charging accessories to keep your nodes powered up for long trips.
- Antenna Upgrades: Our fiberglass antennas come with the adapting cables for the Solar Node, making it a simple plug-and-play upgrade to expand the transmission range.
Key Features
- Plug and Play: The devices can be used out-of-the-box
- 100% Off-Grid: Operates independently of cell towers, satellites, or Wi-Fi. Uses LoRa technology to establish communication even in zero-signal areas.
- Message Broadcast: Send an emergency alert with one tap, simultaneously sharing your location with all nodes within range.
- Subscription-Free: All communication is completely free after purchase—no SIM card or service fees required.
- Encryption: Your location and messages are protected with end-to-end encryption, visible only to members of your team.
Specifications
| SenseCAP Card Tracker T1000-E |
|
Network protocol |
LoRa (Supports 863-928 MHz range), Bluetooth v5.1 |
|
|
Temperature |
Range: -20 to 60℃; Accuracy: ± 1℃ (min ±0.5℃, max ±1℃) Resolution: 0.1℃ |
|
|
Light |
0 to 100% (0% is dark, 100% is brightest) |
|
|
3-Axis Accelerometer |
3-Axis Accelerometer to detect movement (Not currently used in the Meshtastic firmware) |
|
|
LED and Buzzer |
1*LED and 1* buzzer to indicate status |
|
|
Button |
1* Button to operate |
|
|
Antenna |
Internal (GNSS/LoRa/Wi-Fi/BLE) |
|
|
Communication Distance |
2 to 5 km (depending on antenna, installation, and environment) |
|
|
IP Rating |
IP65 |
|
|
Dimensions |
85 * 55 * 6.5 mm |
|
|
Device Weight |
32g |
|
|
Operating Temperature |
-20℃ to +60℃ |
|
|
Operating Humidity |
5% – 95% (No condensation) |
|
|
Certification |
CE / FCC |
|
|
Battery Capacity |
Rechargeable lithium battery, 700mAh |
|
|
Battery Life Monitoring |
Periodic uplink battery level |
|
|
Charge Cable (Adapter not included) |
USB magnetic charging cable, 1 meter |
|
|
Power Input Voltage |
4.7 to 5.5V DC |
|
|
Charging Temperature Limit |
0 to +45℃ |
|
| Wio Tracker L1 Pro |
|
Processor |
Nordic nRF52840 ARM® Cortex®-M4 with FPU runs up to 64 MHz |
|
|
On-chip Memory |
1 MB flash and 256 kB RAM |
|
|
Wireless |
LoRa: Based on Wio-SX1262 Wireless Module , supports 862-930 MHz |
|
|
Bluetooth 5.0 |
||
|
GPS |
L76K (GPS, BeiDou, GLONASS, QZSS) |
|
|
OLED Display |
Size: 1.3 inch |
|
|
Resolution: 128*64 pixels |
||
|
Active Area (mm): L34.5*W23.0*H1.47 |
||
|
Power |
Type-C: 5v—1A |
|
|
Solar energy interface (2.0mm 2p) :5V—1A |
||
|
Batery interface (1.0mm 2p JST) : 3.7v—1A |
||
|
Certification |
FCC, CE, TELEC, RoHS |
|
| SenseCAP Solar Node |
|
Processor |
Xiao nRF52840 Plus (Nordic nRF52840, ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash) |
|
|
LoRa Module |
Wio-SX1262 Wireless Module (862-930MHz, Semtech SX1262, TXOP=22dBm@862-930MHz) |
|
|
GPS Module |
L76K GNSS Module for Xiao (Support GPS/GLONASS/Galileo) |
|
|
Antenna |
LoRa: Type: Rod-shaped rubber antenna Frequency range: 868-915 MHz Gain: 2dBi |
|
|
GNSS: GPS L1 C/A: 1575.42MHz GLONASS L1: 1602MHz BeiDou B1: 1561.098MHz |
||
|
Bluetooth 5.0 |
||
|
Solar Panel |
5W |
|
|
Interface |
Grove *1: IIC/GPIO/UART |
|
|
USB-C debugging |
||
|
Button |
Power on/off |
|
|
Reset |
||
|
User-defined |
||
|
LED |
Charging status indicator lights *2 |
|
|
Solar panel status indicator light *1 |
||
|
Mesh heartbeat light *1 |
||
|
User-defined *1 |
||
|
Power supply |
Type-C: 5V 1A |
|
|
Solar power supply: 5V 1A |
||
|
Battery |
4 x 18650 lithium batteries (3,350mAh each) ● Supporting Type-C and solar charging. ● Discharge environment: -40 ~ 60°C ● Charging environment: 0 ~ 50°C |
|
|
Certification |
FCC, CE, TELEC |
|
|
Dimension |
191.2 x 201.2 x 42.1 mm |
|
Hardware Overview
T1000-E:
- Card-Sized： Can be put in your wallet, hung on your backpack or worn on your chest without burden
- Easy to use：Easily transmit messages and location using the Meshtastic App
- Built–in Sensor： Light, GPS, Accelerator
- IP65：Designed specifically for harsh environments, it is anti-collision and water-resistant.
Wio Tracker L1 Pro:
- Sunlight-Readable Screen： Designed specifically for outdoor use in strong light conditions. Messages and the positions of teammates can be read directly on the device.
- Multi-GNSS：Supports GPS, Beidou, GLONASS; high satellite search speed and high positioning accuracy.
- Dual operation mode： It can either be operated independently via the buttons or connected to a mobile phone to utilize advanced mapping functions.
Solar Node P1/Pro:
- Solar power: Equipped with 4 high-efficiency 18650 batteries and a solar panel, remains operational as long as there is sunlight.
- Instant Repeater: Automatically starts relaying signals upon power-on
- Tool-free Install: Comes with a built-in mounting bracket, enabling quick fixation on tree trunks, utility poles, or in camping areas.
- SMA-reserved: Supports the replacement of fiberglass antennas of various lengths, achieving a signal coverage of up to 10 km or more.
Applications
- Team Activities: Staying connected during group hikeing or other outdoor events.
- Smart Tracking: Track pets or companions outdoors.
- Extreme Adventures: Tracking in deserts or vast wilderness.
- Critical Missions: Wildlife monitoring and professional rescue operations.
Meshtastic in Action
- SenseCAP T1000E overview
- Range Test
*Regional Availability
These products are not available for sale, shipment, or resale in Mainland China due to regional restrictions.
Policies & Guidelines
Warranty, shipping, and purchasing information
- All prices are stated in US dollars (USD), unless otherwise indicated.
- Full payment must be received and confirmed before an order is prepared or dispatched.
- Payment may be made by bank transfer, Bitcoin, or USDT. The payment methods available for each order are displayed at checkout.
- Shipping charges are shown separately at checkout. The quoted shipping charge includes applicable import duties, taxes, and customs-clearance charges for the delivery destination.
- An electronic invoice is made available in the Customer’s account after payment confirmation. An official sales invoice also accompanies the shipment.
- Orders may be cancelled for a full refund before order preparation begins. Once preparation has begun, cancellation is subject to the order’s processing status.
- A Customer wishing to return a non-defective product must request the return within 30 days of delivery. The product must be returned in good condition with its official sales invoice.
- For a non-defective return, the Customer is responsible for return shipping. The refund covers the product price only; the original shipping charge is not refundable.
- Refunds for returned products are initiated after the returned goods have been received and their condition verified. Approved refunds are initiated within seven business days and returned through the original payment method.
- The refundable amount is based on the USD value paid for the product. Refunds for Bitcoin or USDT payments are calculated against that USD amount, rather than a fixed quantity of cryptocurrency. The time required for funds to reach the Customer depends on the payment method and processing provider.
- All devices, sensors, and accessories purchased directly from SenseCAP are covered by a one-year warranty from the date of delivery.
- Warranty eligibility is verified against the original sales record and, where available, the product serial number. For products without a serial number, the order details and official sales invoice are used to identify the purchase.
- The warranty covers manufacturing defects and internal hardware failures arising under normal use and within the product’s specified operating conditions.
- Products that arrive damaged or non-operational should be reported to SenseCAP so that the appropriate shipping or warranty procedure can be arranged.
- Warranty claims are assessed through technical review. Depending on the findings, the resolution may include remote assistance, replacement parts, repair, or an equivalent replacement.
- Customers must obtain return authorization and shipping instructions before sending a product for warranty service.
- For an authorized warranty return, the Customer pays the cost of shipping the product to the designated service location. SenseCAP pays standard shipping for the repaired or replacement product back to the Customer.
- Warranty service addresses the supplied hardware. Network availability, connectivity, subscription services, and any network-based rewards depend on their respective operating requirements and are not guaranteed by the hardware warranty.
- Orders are shipped on a Delivered Duty Paid (DDP) basis to all available delivery destinations.
- The shipping charge displayed at checkout includes transportation, applicable import duties, taxes, and customs clearance. These import charges are not payable separately by the recipient.
- Products with a stated dispatch date are scheduled according to the date shown on the product page. Where no dispatch date is stated, the product is ready for dispatch and is handed over to the carrier within two business days after payment confirmation.
- Dispatch dates refer to handover to the carrier, not delivery to the Customer. Transit time depends on the destination and carrier service.
- Each shipment is accompanied by an official sales invoice and declared using an accurate product description, invoice value, and applicable customs classification.
- Tracking information is provided after the shipment has been handed over to the carrier.
- Customers are responsible for providing an accurate delivery address and any recipient information required to complete delivery and customs formalities.
- Shipping damage should be reported promptly. Customers should retain the product, original packaging, shipping labels, and invoice while the claim is assessed.
- If a shipment is lost or damaged, SenseCAP will review the case with the carrier and advise the Customer of the applicable resolution. Where the issue results from a packing or documentation error attributable to SenseCAP, the resolution may include repair, replacement, or refund.
Policy & Support Pages
Open the complete service, delivery, and support pages